GreenWorks GPW 1702 Manual Del Operador página 15

ASSEMBLING THE GUN HOLDER
Insert the gun holder into the slot until it locks into its tabs.
Fig. 3
ASSEMBLING THE PRESSURE WASHER GUN
Insert the male end (A) of the wand into the female bayonet outlet (B) firmly.
While pushing in the wand firmly, turn clockwise until tabs lock into place to ensure a leak-free
connection.
(See Figure 4-2.)
ASSEMBLY
(See Figure 3.)
A
B
Fig. 4-1
EN - 12
(See Figure 4-1.)
Fig. 4-2