Hamilton Beach 59998 Manual De Instrucciones página 5

How to Assemble the Spiralizer
Cut Hazard.
w CAUTION
•
Blades are sharp; handle discs
with care.
•
Inspect parts before use. Do not
use if parts are cracked, bent, or
damaged.
•
Do not place fingers or utensils
into the discs while in use.
4. Attach motor body onto cutter adapter. Hold unit upright and turn
motor body clockwise until assembly locks into place.
1. Use the finger holes when
handling discs. With the
sharp side of disc up, place
selected disc onto cutter base
by aligning the two notches in
the disc with the two tabs in
the cutter base.
2. Attach food chamber to cutter
base by aligning one white
vertical marking on the food
chamber with the unlock icon
on the cutter base. Rotate food
chamber counterclockwise
until it locks into place.
5. Align channels in cutter adapter with ribs of food chamber. Slide
into place.
3. Cutter food grip should come
already assembled with cutter
adapter. If not, push cutter
food grip onto bottom of
cutter adapter until parts snap
together.
5