Publicidad
Functions
The locomotive offers the following features:
• This model is designed for operation with H0 2-rail
DC systems (track according to NEM standards) with
conventional DC power packs (12 volts).
• This locomotive is equipped with an eight-pole
electrical connection for retrofitting it with a digital
decoder complying with NEM Standard 652.
Suitable Selectrix decoder: 66833
• Headlights change over with the direction of travel.
Information about operation:
• Trix motor vehicles must not be operated on digital
systems without an in-built engine decoder (Motor
can be damaged!).
• Minimum required radius for this model:
356 mm / 14-1/8".
• Handle the delicate pantographs and applied detail
parts with care. The thin supports are easily bent.
• The prototypical coupler hooks and brake lines included
with the locomotive are to be installed on the locomotive
only when it is to be used as a display piece.
• This locomotive is only to be used with the operating
system it is designed for.
• The locomotive must not be connected to more than
one power source at a time.
• Pay close attention to the safety warnings in the
instructions for your operating system.
The necessary maintenance that will comes due with
normal operation is described below. Please see your
authorized Trix dealer for repairs or spare parts.
No warranty or damage claims shall be accepted in those ca-
ses where parts neither manufactured nor approved by Trix have
been installed in Trix products or where Trix products have been
converted in such a way that the non-Trix parts or the conversion
were causal to the defects and / or damage arising. The burden of
presenting evidence and the burden of proof thereof, that the in-
stallation of non-Trix parts or the conversion in or of Trix products
was not causal to the defects and / or damage arising, is borne by
the person and/or company responsible for the installation and /
or conversion, or by the customer.
5
Publicidad
