dirna Bergstrom SLIM COOL EURO 5 Serie Diagnosis De Averías página 20

SLIM COOL
EN
Symptom
• The display shows E2 and the unit
goes off automatically,
display continuing to show error
E2 until the anomaly is repaired. To
remove from the display, press the
On/Off key once on the keypad or
remote control.
The unit does not respond to the remote
control.
One or both compressors not working.
• The unit gives out a beeping sound.
• Centrifugal blower or condenser fan
blocked in short-circuit or disconnected.
with the
• 7.5A fuse of the centrifugal blower or the
condenser fan blown.
• Remote control not programmed.
• Remote control battery flat; the LED
does not come on.
• Electronic control faulty.
• Remote control defective.
• Poor connection of the module terminals.
• Compressor electronic module(s) faulty.
• Compressors faulty.
• A lot of pressure in the circuit due to
excess load or very high temperature.
• Control panel and electronic control
connection cable poorly connected or
inverted.
20
Cause
®