Technical Data - UFESA PV3200 Manual De Instrucciones

●
Do not allow children to perform
cleaning and user maintenance
when they are without supervision.
●
Never iron and clothes or fabrics
that are being worn by human or
pets.
●
Never direct the steam to human
or pets.
●
The iron must not be left
unattended while it is connected
to the supply mains.
CAUTION!
Not observance can result in
damage to possessions
●
Remove any protective films or stickers from the
sole plate and the cabinet.
●
Unwind and straighten the power cord before usage.
●
Fill the water using included vessel for water.
●
Keep the power cord away from the soleplate.
●
Make sure that the voltage on the rating plate
corresponds to that of your power grid.
●
Always connect the iron to a suitable mains supply
outletm (AC only), with grounding, which voltage
complies with the voltage indicated on the appliance
nameplate.
●
Do not use an extension power cord set without
grounding!
●
Do not add perfume, vinegar or other chemical liquids
into the water tank; they can damage the appliance
seriously.
●
Do not immerse the appliance in water or any other
liquid.
●
Do not wrap the power cord around the unit for
storage until it has cooled down completely.
●
Do not attempt to open the cabinet or dismantle
any parts from the appliance.
●
The appliance is not intended to be operated by
means of an external timer or separate remote-
control system.
●
If you do not use the iron, even for short time, switch
it off, turning Temperature Dial in anti-clockwise
direction to "MIN".
●
If you are not going to use the iron even for a short
period of time, turn off the steam function by setting
the steam control to
●
Use "SELF CLEANING" function at least once
a month.
position.
SUGGESTION
Information on the product
and suggestions for its use
●
The iron is intended for domestic usage only and
you can use it solely according to herewith manual.
Hints for ironing
1
Sort out the articles to be ironed according to
the type of fabric. This will minimize the frequency of
temperature adjustment for different garments.
2
Test ironing a small area on the backside or inside
the garment if you are unsure about the type of fabric.
Start with a low temperature and increase gradually.
3
Wait for about three minutes before ironing heat
sensitive fabrics. Temperature adjustment needs certain
time to reach the required level no matter it is higher or
lower.
4
Delicate fabrics such as silk, wool, velour, etc. are
best ironed with an ironing cloth to prevent shine marks.
5
You may need a few times of press to activate the
spray, burst and vertically burst function.
6
Read the garment labels and follow the
manufacturer' s ironing instructions which are often
shown by symbols similar to the following:
Temperature settings
• Acetate
• Elastics
• Cupro
• Polyester
• Proteins
• Silk
• Cotton
• Linen

Technical data

The iron technical parameters are included at the name
plate.
Sole plate – ceramic.
This device complies with Commission Regulation (EC)
no. 1275/2008 on eco-design requirements.
• Polyamide
• Polypropylene
• Triacetate
• Viscose
• Wool