Cleaning And Maintenance; Advice On Disposal - UFESA PV3200 Manual De Instrucciones

1
The iron will shut-off automatically after about 30
seconds of inactivity if left on its soleplate (in horizontal
position) and after about 8 minutes in vertical position.
2
The Auto-Off Light will pulse (flash) which
indicates that the iron is in the automatic shot-off mode.
3
Move the unit to continue ironing. The iron will go
back to the previous settings and will heat-up again.
The iron will revert to the previous
settings each time it is used (moved).
The iron will heat-up for about 60
seconds up to the temperature set with the
temperature dial.

Cleaning And Maintenance

● Unplug the appliance.
● Before cleaning, allow the iron to cool completely.
● Use a soft cloth and mild detergent for cleaning the
iron.
● For cleaning the housing, do not use abrasive
cleaning agents such as emulsions, creams, pastes,
etc. They may remove graphic symbols, such as scales,
markings, warning signs, etc.
● Never use sharp or rough objects to remove the
deposits from the soleplate.
● Never use any abrasive, vinegar or descaling agents
to clean the soleplate.

Advice on disposal

Our goods come in optimised packaging. This
basically consists in using non-contaminating
materials which should be handed over to the local
waste disposal service as secondary raw materials.
This product complies with EU Directive
2002/96/EC. The crossed wheelie bin
symbol shown on the appliance indicates that
when it comes to dispose of the product it
must not be included in with household refuse. It must
be taken to a special refuse collection point for electric
and electronic appliances or returned to the distributor
when purchasing a similar appliance. Under current
refuse disposal regulations, users who fail to take
discarded appliances to special refuse collection points
may be penalised. Correct disposal of discarded
appliances means that they can be recycled and
processed ecologically, helping the environment and
allowing materials used in the product to be reused.
For more information on available waste disposal
schemes contact your local refuse service or the shop
where the product was purchased. Manufacturers and
importers are responsible for ecological recycling,
processing and disposal of products, whether directly
or via a public system.
Your local town council can provide you with information
about how to dispose of obsolete appliances.
The manufacturer does not accept any liability for any damages
resulting from unintended use or inappropriate handling.
The manufacturer reserves his right to modify the product any
time in order to adjust it to the law, standards, directives, or due
to construction, trade, aesthetic or other reasons, without prior
notice.