Steam Ironing - UFESA PV3200 Manual De Instrucciones

Features
1
Spray Nozzle
2 Water Tank Cover
3
Steam Control
4
Spray Button
5
Steam Burst Button
6
Auto-Off Light
7
Bend Protector
8
Power Cord
9 Heater Light
10
Water tank
11
Temperature Dial
12
Self-Clean Button
13
Soleplate
14
Water Cup
Before first use
1
Unwind and straighten the Power Cord.
2
Fill the tank with water. See the "FILLING THE
IRON WATER" section.
3
Plug in the unit.
First use
1
Proceed as described in the "Before first use"
section.
2
Turn the Temperature Dial clockwise to "●●●".
3
The Heater Light will come on.
The light will go off once the required
temperature is reached.
4
Set the Steam Control to
5
Place the iron in horizontal position or press the
steam burst button. Steam will come out of the holes in
the soleplate.
● The iron is ready for use.
6
Begin first time ironing with an old towel.
The iron will stop steaming once the
water tank is empty.
A
position.
Ironing
Always follow the ironing instructions
on the garment's care label.
FILLING THE IRON WITH WATER
● Unplug the unit.
1
Set the Steam Control to
Water Tank Cover.
2
Using the supplied water cup, fill the tank with
water below the "max" level.
For best ironing results, it is
recommended to use fresh
demineralised or distilled water.
Do not use chemically descaled water
or any other liquids.
Never exceed the 'max' level marked on
the side of the water tank.
3
Close the Water Tank Cover.
DRY IRONING
1
Unwind and straighten the Power Cord.
2
Plug in the unit.
3
Set the Steam Control to
4
Turn the Temperature Dial to "●", "●●" or "●●●".
5
The Heater Light will come on.
The light will go off once the required
temperature is reached.
● The iron is ready for use.

STEAM IRONING

1
Proceed as described in the "Before first use" section.
2
Turn the Temperature Dial to "●●" or "●●●".
For optimum steam quality, do not set
the Temperature Dial to "●" position for
steam ironing.
B
position and lift the
position.