Alcad ACO-000 Manual Del Usuario página 19

Once connections have been made up, turn on the PC.
The operating system will automatically detect the PC interface
connected to the computer’s USB port, indicating that it has
noticed the presence of the new hardware and requesting the
appropriate drivers. Select the drivers located in the \USBDrivers
folder on the CD.
Once the drivers have been installed, the system is ready for
the "Videoportero PC" application to be installed.
Note:
If the operating system fails to automatically detect the PC
interface, the drivers must be installed manually.
(Consult the manual of your PC operating system to see how
to install new hardware).
To install the "VideoPorteroPC" application, double-click on
the "setup.exe" icon on the CD to launch the wizard which
will guide you through the steps of installing the application
VIDEODOOR ENTRY SYSTEMS
"VIDEOPORTERO PC" APPLICATION
Launch the "VideoPorteroPC" application on your computer
by selecting the file " VideoPorteroPC" located in Start >
Programs > ALCAD > VideoPorteroPC. If you are unable
to launch the application, see section "Trouble shooting",
page 25.
"