Tabla de contenido
Publicidad
Enlaces rápidos
Model #
747W
Widescreen
TV Console
Assembly Instructions
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading both the Assembly Instructions and
Finishing Hints before you begin your project.
For normal household use only.
recommended for commercial use.
Do not climb, sit or stand on this piece of
furniture.
Unload items from this unit prior to moving.
Do not overload shelves on this unit.
Before loading or moving this unit, check all screws
and supports for tightness.
For maximum stability, attach unit to the wall using
the enclosed hardware as per instructions.
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
which are defective, missing or damaged
during assembly. Please contact Whittier
Wood Products customer service department
directly (by phone, fax, mail or email) for
replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number (upper left corner of this
page), part letter, production code, quantity
needed, reason for replacement and your full
name and address along with a telephone
number in case we need to contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • Email: info@whittierwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Read both the Assembly Instructions and Finishing
Hints completely before beginning.
Store the parts: 1) in their box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
be affecting the stability of your furniture. Tighten or
repair as needed.
Production Code:
We will replace any parts
10/05
Publicidad
Tabla de contenido
Manuales relacionados para Whittier Wood Products 747W
Resumen de contenidos para Whittier Wood Products 747W
- Página 1 Model # 747W Widescreen TV Console Service Policy: We will replace any parts which are defective, missing or damaged Assembly Instructions during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or email) for replacement parts.
- Página 2 747W Widescreen TV Console — Parts List BEFORE BEGINNING ASSEMBLY, check that the quantities of the parts received match those on the parts list below. G — Cleat — Qty. 1 H — Left Front Leg — Qty. 1 A — Vertical Divider — Qty. 2 I —...
- Página 3 747W Widescreen TV Console — Parts List (cont.) O — Small Adjustable Shelf — Qty. 2 P — Door — Qty. 2 Y — Adjustable Glide Q — Rafix Cam — Qty. 28 — Qty. 2 ZF — Hinge Spacer — Qty. 4 R —...
-
Página 4: Tools Required
747W Widescreen TV Console ASSEMBLY INSTRUCTIONS TOOLS REQUIRED: Phillips Head Screwdriver, Mallet or Padded Hammer, Wood Glue & Tape Measure. IMPORTANT NOTE: WE RECOMMEND FINISHING THE UNIT BEFORE FINAL ASSEMBLY. Before finishing, read enclosed finishing hints. NOTE: Due to the fact that more than one type of hardwood is used, we recommend testing for desired color. - Página 5 • Three in each front leg (H & J) • Five in the Top Facing (M) FIG. 5 5. Glue Wood Dowel (U): • Two in each Vertical Divider (A) • Two in the Foot (F) 747W — Page 5...
- Página 6 7. Attach Left Side (C) to Bottom Shelf (B) by sliding the Rafix Bolts (R) into the Rafix Cams (Q). Tighten the cams. Repeat and attach the Right Side (D) to the Bottom Shelf (B). See FIGURE 7. Page 6 — 747W...
- Página 7 Place the Cleat (G) under the Foot (F) so that one end of the Cleat (G) is aligned with one of the Wood Dowels (U). See FIGURE 9. Use three Screws (S) to attach the Foot (F) to the Cleat (G). 747W — Page 7...
- Página 8 Rafix Cam in the base. Make sure that the row of Rafix Bolts in the Base (I) are towards the top edge of the base. Tighten the cams. See FIGURE 11. Repeat steps with the Right Front Leg (J). Page 8 — 747W...
- Página 9 Left Side (C). See FIGURE 13B. To add strength, use a Screw (V) through the top side of the Bottom Shelf (B) into the Back Leg (K). See FIGURE 13C. Repeat steps to attach other Back Leg (K) to Right Side (D). 747W — Page 9...
- Página 10 Plastic Inserts (Z) and tap into the holes in the bottom of the Front Legs (H & J). FIG. 15 15. Slide the Top Facing (M) onto the front of the unit aligning the five Rafix Bolts (R) into the five Rafix Cams (Q). Tighten the cams. Page 10 — 747W...
- Página 11 Remove the screw and insert through the Hinge Plate (ZE) and Hinge Spacer (ZF). With the long arm facing out (arrow on plate points out), fasten each set in place with Screw (ZG). See FIGURE 18. 747W — Page 11...
- Página 12 21. With unit in its permanent location, rotate the Adjustable Glides (Y) as necessary to level the unit. The doors may need some adjusting after leveling the unit. 22. Once in place and level, install the Furniture Tipping Restraint (ZK). Carefully follow the instructions contained on the package. Page 12 — 747W...
-
Página 13: Consola Para Tv De Pantalla Grande
Modelo # 747W Consola para TV de Normas para obtener servicio: Reemplaza- Pantalla Grande remos las piezas que tengan defectos, falten o se dañen durante el armado. Sírvase comunicarse con Instrucciones para Armar el departamento de servicio al cliente de Whittier Wood Products directamente (por teléfono, fax,... -
Página 14: 747W Consola Para Tv De Pantalla Grande
747W Consola para TV de Pantalla Grande Lista de piezas ANTES DE ENSAMBLAR, verifi que que haya recibido todas las piezas que se listan en la lista de piezas que se presenta a continuación. Parte Descripción Cantidad Parte Descripción Cantidad Parte Descripción... - Página 15 (B) utilizando el tornillo (S) a través del del estante inferior y a la misma distancia de los listón (G). Vea la FIGURA 10B. paneles laterales. 747W SP — PAGE 3...
- Página 16 (ZF). Con el brazo largo hacia fuera (la flecha el dispositivo de sujeción antivuelco (ZK) en la placa apunta hacia fuera), atornille cada siguiendo fielmente las instrucciones contenidas conjunto en su lugar usando tornillos (ZG). Vea en el paquete. la FIGURA 18. PAGE 4 — 747W SP...
- Página 17 No. de modèle 747W Console pour Téléviseur Politique de service : Nous remplacerons toutes Large Écran les pièces défectueuses, manquantes ou endom- magées pendant le montage. Veuillez contacter Instructions de Montage directement le service clientèle de Whittier Wood Products (par téléphone, fax, courrier ou e-mail) pour obtenir les pièces de remplacement.
-
Página 18: Nomenclature Des Pièces
747W Console pour Téléviseur Large Écran Nomenclature des pièces AVANT DE COMMENCER LE MONTAGE, assurez-vous que les quantités des pièces reçues correspondent à la nomenclature des pièces fi gurant ci-dessous. PIÈCE DESCRIPTION QTÉ PIÈCE DESCRIPTION QTÉ PIÈCE DESCRIPTION QTÉ Séparateur vertical ..2 Petite étagère réglable . - Página 19 Assujettissez le pied (F) à l’étagère inférieure (B) Introduisez les broquettes (X) en frappant au moyen de la vis (S) que vous introduisez dans dessus, dans le bas de chaque pied arrière (K). le tasseau (G). Voir la FIGURE 10B. 747W FR — PAGE 3...
- Página 20 22. Une fois que le meuble est en place et à niveau, jeu en place au moyen de la vis (ZG). Voir la installez l’attache antibascule (ZK). Suivez avec FIGURE 18. soin les instructions contenues dans le paquet. PAGE 4 — 747W FR...