Transcend 3 miniCPAP Guía Rápida página 8

Transcend 3 miniCPAP Quick Guide Page 8
Power button
Green LED
Yellow LED
Ramp button
Power Connection Jack and USB Port
Power Jack
The power jack accepts the barrel plug of the output cable from a DC power source to
operate the Transcend 3 miniCPAP.
A variety of power sources may be used to power the Transcend 3 miniCPAP. An AC to DC
converting power supply is provided with your device and should be used when powering
the device by line (wall outlet) power.
An optional mobile power adapter connects to a DC power outlet, such as that found in an
Automobile, truck, RV, boat, or similar vehicle.
Optional Transcend battery packs are also available to power the Transcend 3 miniCPAP.
USB port
A mini-AB USB port is provided for direct data exchange between the Transcend 3
miniCPAP and a computer via a USB data cable. This interface allows the clinician to
configure the Transcend 3 miniCPAP for prescription pressure, ramp settings and Auto
settings and provides access to therapy compliance information that can be viewed by the
user and emailed to the clinician.