Bell DASHBOARD 300 Manual Del Usuario página 8

additional function modes
aVerage SpeeD (aVS)–
Average speed is indicated by AVS and is displayed on
the bottom line. AVS works in conjunction with the Trip Timer (TM) to calculate the
average speed for a specific trip. Now press the RIGHT button to advance to the Trip
Timer (TM) mode.
trip tiMer (tM)–
Trip Timer is indicated by TM and is displayed on the bottom
line. The Trip Timer is activated automatically with computer input (comes on
automatically when you begin riding, turns off when you stop). It records only the time
actually spent riding. To reset TM to zero, return to DST (Trip Meter) mode and reset
to zero per the instructions above. Return to TM mode and press RIGHT button to
advance to TEMPERATURE (TEMP) mode.
teMperature (teMp)–
Your computer has a thermometer to measure outdoor
temperature. To select between Celsius (C) and Fahrenheit (F) readout, press and
hold the LEFT button for 3 seconds until you see a flashing "F". Press LEFT button
to confirm Fahrenheit (F) readout. If you prefer Celsius readout, press RIGHT button
to switch to Celsius (C) and then press LEFT button to confirm. Now press the RIGHT
button to advance to Calorie (CAL) mode
8