Numark M80 Guia De Inicio Rapido página 2

1. Make sure all items listed on the front of this guide are included in the box.
2. READ SAFETY INSTRUCTIONS BEFORE USING THE PRODUCT
3. Study this setup diagram.
4. Place the speakers in an appropriate position for operation.
5. Make sure all devices are turned off and all volume/gain knobs are set to "0".
6. Connect all stereo input sources before turning on the power.
7. Connect the speakers to the power amplifier(s), tape decks, and/or audio
sources.
8. Plug the primary speaker and other powered units into AC power.
9. Switch everything on in the following order.
• audio sources (i.e. CD Players, Turntables or other audio sources)
• any amplifier/output sources
•
last, speakers
10. When turning off, always reverse this operation by,
• turning off speakers
•
any amplifier/output sources
• last, any audio sources
11. Go to http://www.numark.com
QUICK SETUP GUIDE
for product registration.