Carl Stahl Kromer XBT Traducción De Las Instrucciones De Servicio página 15

EN
Note: You must hold the foot loops tightly, as they are pre-loaded with a strong
spring tension.
 Now, place your hands on your hips and pull on the hand loops. Place your hand
through the two loops with your palm facing downward, as shown in the image on the
left. Be sure that your thumb is in the middle, and that the arrow points to the location of
your thumb joint (right image). After you pull the straps tight, the soft and somewhat
wider material should be between your thumb and pointer finger.
 The XBT should look like
this when properly at-
tached:
The two spring balancers
are located to the left and
right, at the center of your
hips. The cables
down your sides to your
hand and foot loops for
smooth movements.
run
15
Operating Instructions