Publicidad
A - Adjustable headrest
B - Seat Cover
C - Shoulder pads hooks
D - 5-point Harness
E - Removable shoulder pads
F - Harness buckle
G - Harness adjuster button
H - Harness adjuster strap
I - Recline handle
J - Rotation handle (right & left)
K - Rearward facing / Forward facing selector button
L - ISOFIX clips activation handle
M - ISOFIX connectors
N - Headrest adjustment handle
O - TOP TETHER tensioning indicator
P - TOP TETHER tensioning adjuster
Q - TOP TETHER
R - TOP TETHER hook
S - TOP TETHER storage
T - Instruction leaflet storage
U - Automatic safety belt
V - Carrying
WARNING:
• The AxissFix is intended for car use only.
• The AxissFix is developed for an intensive use
of approximately 10 years.
• Make sure you can fit no more than one finger
between the harnesses and your child (1cm).
If there is more space than 1 cm, tighten the
harness belt further.
• Check to make sure the headrest is adjusted to
the proper height.
ATTENTION:
• When installing the seat, the belt of
the TOP TETHER can turn one quarter
turn according to the position of the
anchorage point. This does not impair
the proper operation of the product.
• When installing the car seat, it is
necessary to remove the headrest in
order to put the TOP TETHER through
correctly.
• When installing the car seat, spaces
between the base of the car seat and
the vehicle seat are possible depending
on the position of the anchorage
points within the vehicle.
CARE
Fabric:
• The cover and the shoulder pads can
be removed for washing. If the cover
needs to be replaced at any time,
only use official Bébé Confort cover
because it constitutes an integral part
of the restraint performance.
Bébé Confort
EN
I
I
AxissFix
65
Publicidad
