Trim Bumper Fascia And Fascia Panel - Using Marker And Utility Knife, Cut A Notch On The Bottom Fascia, See Figure 2, And Cut Fascia Panel Into Two Pieces, See Figure; Reinstall All Fasteners, Wirings, Bumper Fascia, And Panels Removed In Step - Horizon Global 76199 Instrucciones De Instalación

7. Trim bumper fascia and fascia panel – Using marker and utility knife, cut a notch on the bottom fascia, see Figure 2, and cut fascia panel into two pieces, see Figure 3.

8. Reinstall all fasteners, wirings, bumper fascia, and panels removed in Step 1, 2.

C L
3.5"
2.25''
2.0" 2.0"
©2018 Horizon Global™ Corp - Printed in Mexico P Sheet 10 of 30 76199NP 05-01-18 Rev. A