Kohler K-19034 Guía De Propietario página 5

Drill mounting
holes.
Apply silicone
sealant.
1. Install Lavatory – K-19034
CAUTION: Risk of personal injury. Vitreous china is heavy.
Do not attempt to lift or install this product without
assistance.
IMPORTANT! For lavatory installations using the K-18598 vanity:
Before installing the lavatory, a temporary support brace must be
placed underneath the vanity. Refer to the installation guide packed
with the vanity for proper instructions.
Position
Install the faucet and drain to the lavatory according to the faucet
and drain manufacturer's installation instructions.
Align and place the lavatory over the cutout opening.
Mark the two lavatory anchoring hole locations on the finished
wall with a pencil.
Remove the lavatory from the cutout opening and set aside.
Drill mounting holes 1/4" (6 mm) through the finished wall at the
marked locations.
Place the lavatory over the cutout opening.
Insert a hanger bolt through each anchoring hole of the lavatory
and into the drilled mounting holes.
Connect Supplies
Kohler Co.
Install hanger
bolts.
5
Vanity/Countertop
Lavatory
Washer
Cap Nut
1052866-2-D