LG DLEX3250 Serie Manual Del Usuario página 22

22
INSTALLATION INSTRUCTIONS
Connecting Gas Dryers (cont.)
WARNING
To reduce the risk of fire, electric shock, or injury
to persons when using this appliance, follow basic
precautions, including the following:
Failure to do so can result in fire, explosion,
or death.
can result in fire, explosion, or death.
Failure to do so can result in fire,
explosion, or death.
Failure to do so can result in fire,
explosion, or death.
result in fire, explosion, or death.
fire, explosion, or death.
do so can result in fire, explosion, or death.
Failure to do so
Failure to do so can
. Failure to do so can result in
Failure to
Connecting the gas supply
1. Make sure that the gas supply to the laundry room is
turned OFF. Confirm that the type of gas available in
your laundry room is appropriate for the dryer. The
dryer is prepared for Natural Gas with a ⁄8 - inch NPT
gas connection.
2. Remove the shipping cap from the gas connection
the threads of the gas connector when removing the
shipping cap.
using a new flexible stainless steel connector with a ⁄8
- inch NPT fitting.
4. Securely tighten all connections between the
dryer and your laundry room's gas supply. Turn on
your laundry room's gas supply and check all pipe
connections (both internal and external) for gas leaks
with a noncorrosive leak-detection fluid.
Electrical connection
Connection
AGA/CSA-Certified
Stainless Steel Flexible
Connector
High-altitude installations
If your gas dryer is being installed at an elevation above
or gas supplier.
Plug dryer into a
outlet.
Plug
Gas Supply
Shutoff Valve