Philips HF3650 Guia De Inicio Rapido

Quick start guide
When you use the Sleep & Wake-up light for the first time, you need to set up basic functions of the
appliance. Set the general settings like language and time first. After that you can set one wake-up
profile and one unwind program.
Note: The settings are only saved if you tap on the check mark.
1 Place the Sleep & Wake-up light at approximately 16-20 in / 40-50 cm from your head, on a flat
stable surface of your bedside table.
2 Attach the small plug into the appliance and plug the adapter in the wall socket.
3 Start the setup wizard by tapping on the start icon.
4 You will be guided though the setup wizard on the Sleep & Wake-up light.
Note: The wake-up profile and the relaxation program can be set later.
Hello
Skip these settings by tapping the arrow repeatedly. However, we advise
you to set your wake-up profile and your relaxation program during this
setup. This can help you explore the different functions of the appliance.
Settings
Select your language.
Settings
Set the clock time.
Wake-up profile
In your wake-up profile, you can set your alarm, the maximum light intensity and the type of wake-
up sound you prefer. If you select the radio* function, you can select and save your preferred radio
station. You can still change the radio station after this setup.
*HF3653 does not feature a radio.
Set the time you want to wake up.
Wake up profile
Select the preferred maximum light intensity. The lamp of
the appliance simulates a sunrise by gradually increasing in
brightness.
The default duration of the brightness increase to the
maximum intensity is 30 minutes.. You can change the
duration in the alarm setting menu after this set up has been
completed.
Enter the sound menu. Here you can choose type of sound
(radio, natural sound or no sound), type of natural sound and
volume.
Unwind programs
The Sleep & Wake-up light features two unwind programs to help you relax
before falling asleep: Sunset Simulation and RelaxBreathe.
Unwind
Sunset simulation
Sunset simulation
Select the duration of the Sunset simulation.
Select the starting light intensity. The color of the light changes from bright yellow to
warm orange to soft red, simulating a natural sunset.
Select the type of sound. You can either choose a natural sound, radio*, no sound or
AUX.
For AUX you have to connect your music playing device to the AUX socket.
RelaxBreathe
In this menu you can select one of seven breathing rhythms. Each breathing rhythm has a fixed
amount of breaths per minute. For each of these rhythms, you can select sound or light to accompany
the relaxation program.
Note: If you have questions about the RelaxBreathe program, see section 'RelaxBreathe' in the
user manual.
RelaxBreathe
Select the duration of the breathing program.
Select the breathing rhythm.
Select either sound or light to accompany the breathing program.
The setup is complete
Note: The settings are only saved if you tap on the check mark.
Done!
English
HF3650, HF3651
© 2019 Koninklijke Philips N.V.
All rights reserved
4222.002.7832.2 (22/5/2019)