Dust Extraction - Flex XS713 Instrucciones De Funcionamiento Originales

Attaching hook & loop abrasive
WARNING!
DISCONNECT TOOL FROM POWER
SOURCE!
To install hook & loop abrasives, align the
abrasive with the sander pad and press
in place as shown in Ñig. 2.

Dust extraction

WARNING!
DISCONNECT TOOL FROM POWER
SOURCE!
1. Attach the dust bag to the connection
of the sander as shown in fig. 3.
2. Periodically remove dust container from
flange and empty collected dust,
(see Ñig. 4).
NOTE
A light twist facilitates removal and attach-
ment of the dust bag.
10
Random orbit sander XS713
Tap container lightly to remove compacted
dust. DO NOT WASH CONTAINER.
Dry compressed air may be used to blow out
container.
CAUTION!
Wear safety glasses while using compressed
air.
CAUTION!
Never run sander with dust container
or dust collector assembly removed.
Dust could be blown into eyes.
It is possible to connect a dust extraction unit
using the hose adapter provided.