Westfalia 307374600001 Manual De Montaje página 2

SIARR
08 - 85
PREPARATION
* Lower the spare wheel.
* Beneath the vehicle on the right hand side, unhook the electrical wires.
ASSEMBLY
* Fasten the towing arms onto the inside of the longitudinals
at points X (without tightening) using fastening kit X
* Fit the tow bar body to the points marked Y using
fastening kit Y
FINISHING
* Tighten the arms, then the tow bar body
to the torques stipulated below.
* Reassemble all of the components removed
during the above procedure.
FASTENING KIT
4 off HM12x45 screws
X
4 off CS12 washers
4 off 12/27 plain washers
4 off HM10x45 screws
4 off HM10 nuts
Y
4 off CS10 washers
8 off 10/22 plain washers
M16 AC8.8 19,5daNm M12
M16 AC10.9 27,5daNm M10
M12 AC8.8 8,1daNm M10
ASSEMBLY INSTRUCTIONS
2 off HM16x45 screws
Z
2 off HM16 nuts
2 off DEC16 washers
TORQUES :
AC10.9 11,4daNm M8 AC8.8
AC8.8 4,7daNm M8 AC10.9
AC10.9 6,7daNm
FILE : BUREAU\NOTICEDEMONTAGE\SIARR\NDMWESTFALIA\NDM0885-C - FOLIO NDMANG
Type Type
Approval No.
Attelage pour
FORD Transit e11*94/20*00*4700
Connect
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
307374600001
Max. Total Max. Total Max. Verti-
Authori. Weight Towable Weight
cal load
2 340 kg 1 200 kg
Value
D
75 kg 7,78 kN