Rain Delay; Adjust Water - Rain Bird STP4PL Guía De Referencia Rápida

Manual Water All
Water all zones now
Turn dial to the AUTO position.
Press the ALL button to
start watering. The first zone
will run for its currently
ALL
programmed run time.
The display shows the active zone
number and run time remaining.
When completed, the next zone
will begin watering.
Watering
AM
Current Time
To stop watering the active zone
and skip to next programmed zone,
press the ALL button again.
  NOTE: To stop all manual
watering, turn dial to the OFF
position.
Press UP/DOWN arrow buttons to
set the delay time for up to 3 days
(72 hours).
 
NOTE: Any scheduled
watering that falls within the
delay period will not occur.
Zone #
MIN
Remaining
All Durations
Adjusted
Press UP/DOWN arrow buttons to
adjust percentage. Note the base
value is set at 0% and not 100%.
For example, a +50% adjustment
means10 min becomes 15 min.
  NOTE: Adjustment applies to
ALL run times for ALL zones.

Rain Delay

Suspend watering
Hours
Delay

Adjust Water

Adjust for seasonal
weather variation
%
Auto
Normal operations
The display shows zone, time
and date when next scheduled
watering will occur (unless a rain
delay is set).
Next Zone #
to Water
AM
Current Time
When a zone is watering, the
display shows the active zone
number and run time remaining.
Watering
PM
  NOTE: Turn dial back to the
AUTO position whenever
programming is completed.
For additional information, see Glossary
of Irrigation Terms on page 22
To download the complete user manual:
http://www.rainbird.com/homeowner/
support/timers.htm#current
AM
Zone #
MIN
Remaining
5
English