jbc T210 Manual Del Usuario página 4

Nitrogen Handles features
These are for working in an oxygen-free atmosphere providing better quality soldering. They
offer extra heat to the solder joint and help prevent oxidation. The JBC GN-A Nitrogen Generator
Module or an external nitrogen feed is needed at the operator's bench.
For C210 Cartridge range
Nitrogen Precision Handle
Ref. T210-NA
For C245 Cartridge range
Nitrogen Handle
Ref. T245-NA
For C470 Cartridge range
Nitrogen HD Handle
Ref. T470-NA
Changing cartridges
Before changing the cartridge
Nozzle
First remove the nozzle. Then loosen the screw
to remove the cartridge (T245-NA / T470-NA).
Use a pliers to change or remove nozzles
when hot.
4
Nitrogen feed
Nozzles
Ref. B6647
Nitrogen feed
Nozzles
Ref. B7243
B7244
Nitrogen feed
Nozzles
Ref. B6193
B6194
B6195
After changing the cartridge
Mark
Insert the cartridge, tighten the screw and then
place the nozzle.