jbc T210 Manual Del Usuario página 5

T210 & T245 Changing cartridges
Save time and change cartridges safely without switching the station off.
1. Removing
Place the handle in the
extractor and pull to remove
the cartridge.
*Important
It is essential to insert the cartridges as far as the mark for a proper connection.
T470 Changing cartridges
1. Removing
Loosen
Loosen the screw. Place the Soldering Iron in
the extractor and remove the cartridge.
2. Inserting
Place the handle on top of
the new cartridge and press
down.
Mark
2. Inserting
Insert the new cartridge* and press slightly
as far as the mark and tighten the screw.
w w w.jbctools.com
3. Adjusting
C
B
A
Use the holes for fixing the
cartridge* as follows:
A. For straight C210.
B. For curved C210.
C. For curved C245.
D. For straight C245.
D
5