Operation(Model#Hdpmpn); Lubrication; Driving A Fastener - Husky DPFR2190 Guía De Uso Y Cuidado

Operation(Model#DPFR2190)
WARNING: The tool must be allowed to recoil away
from the work piece. Do not drive a nail on top of
another nail.
WARNING: During normal use the tool will recoil
immediately after driving a fastener This is a normal
.
function of the tool Do not attempt to prevent the
.
recoil by holding the tool against the work Restriction
.
of the recoil can result in a second fastener being
driven from the tool Grip the handle firmly and let the
.
tool do the work Failure to heed this warning can
.
result in serious personal injury
.
WARNING: Always know the operational mode of the
tool before using. Failure to know the operational
mode could result in death or serious personal injury.
WARNING: An improperly functioning tool must not be
used. Do not actuate the tool unless the tool is placed
firmly against the work place.
14

Operation(Model#HDPMPN)

1

Lubrication

This tool requires lubrications before using the tool for the
first time and before each use. If an inline oiler is used,
manual lubrication through the air inlet is not required on a
daily basis.
Disconnect the air supply from the tool to add lubricant.
Turn the tool so the air inlet is facing up. Place 2-3 drops
of pneumatic fastening tool oil into air inlet. Do not use
detergent oils, oil additives, or air -tool oils. Do not use
detergent oil or additives as these lubricants will cause
accelerated wear to the seals and bumpers in the tool
resulting in poor tool performance and frequent tool
maintenance
.
After adding oil, run too briefly. Wipe off any excess oil
from the cap exhaust.
CAUTION: The work surface can become damaged by
excessive lubrication. Proper lubrication is the owner's
responsibility. Failure to lubricate the tool properly will
dramatically shorten the life of the tool and void your
warranty.
2

Driving a fastener

,
Connect the air supply to the tool.
Load fastener into the palm.
15
Please contact 1-888-HD-HUSKY for further assistance.
HUSKYTOOLS.COM