Installation Options - Sartorius YDH01CIP Instrucciones De Instalación

Installation options

Columns
Device
series:
Weighing
platform:
Equipment Supplied
YDH01CWP/CWS Female connector
Screw
Washer
YDH02CWP/CWS Female connector
Screw
Washer
YDH03CWP/CWS Female connector
Screw
Washer
Nut
Installation
Purpose
For installing the Combics indicator on a column attached to a weighing platform.
You can attach the column to the long side or the short side of the weighing platform
(the illustration shows the column mounted on the long side).
Remove the load plate from the weighing platform.
Combics
DC (320 + 240 mm) ED (400 + 300 mm) FE (500 + 400 mm)
Short Long Short Long
side side side side
– + – +
M6+20 M6+20 M6+20 M6+20
+ + + +
– + – +
M6+20 M6+20 M6+20 M6+20
+ + + +
– + – +
M6+20 M6+25 M6+20 M6+25
+ + + +
+ + + +
= not recommended
Midrics ®
DC (320+ ED (400+ FE (500+
240 mm) 300 mm) 400 mm)
Short Long Long side only
side side
– + + +
M6+20 M6+20 M6+25 M6+30
+ – + +
– + + +
M6+20 M6+20 M6+25 M6+30
+ – + +
– + + +
M6+20 M6+25 M6+30 M6+30
+ – + –
+ – + +
Signum Supreme
«stainless steel»:
Only CWS models
Stainless steel
Long side only
+ –
M6+40 M4+16
+ +
+ –
M6+40 M4+16
+ +
+ –
M6+40 M4+16
– +
+ –
3