Publicidad
Idiomas disponibles
Idiomas disponibles
Driver's Seat Wire Harness Assembly:
17. Disconnect driver's seat wiring harness from body
harness jumper - see Figure 13.
FIGURE 13
18. Turn seat over, route harness underneath seat motors
(between seat motors and seat cushion), and assemble
harness connectors to heated seat module - see Figure
14.
FIGURE 14
19. Connect harness to seat back cushion heat pad and
assemble rosebud clip to seat frame - see Figures 15
and 16.
FIGURE 15
Heated Seats
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCOR-
DANCE WITH GMSPO SPECIFI-
CATIONS.
FIGURE 16
REVISION
AUTH
20. Connect harness to seat cushion heat pad and as-
semble rosebud clips to seat frame and to plastic
channel - see Figures 17, 18 and 19.
FIGURE 17
21. Route harness along with existing seat wiring, under
seat motors and secure with wire-ties - see Figures 20
and 21.
FIGURE 20
22. Tie-up excess wiring and secure to plastic channel - see
Figures 22 and 23.
FIGURE 22
PART NO.
REV 13MR08
INSTALLATION INSTRUCTIONS
DR
TITLE
PART NO.
19159289
6200 Grand Pointe Dr., Grand Blanc, MI 48439
FIGURE 18
FIGURE 19
FIGURE 21
FIGURE 23
19159289
SHEET
Heated Seats
3
SHEET
3
24
OF
24
OF
Publicidad
