Technical Data; Safety Instruction; Use And Operation - Klarstein 10030526 Manual Del Usuario

Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take care of the following
hints to avoid damages. Any failure caused by ignoring the mentioned items and cautions mentioned in the
instruction manual are not covered by our warranty and any liability.
Item number
Power supply
Power consumtion
• To prevent the risk of electric shock, DO NOT USE the set with broken power supply wires or broken plug.
All repair works must be made by a professional (authorized distributor). NEVER TRY TO REPAIR the cable or
plug by yourself. Please take the damaged set to your local authorized maintenance center
• The total ampere ratings of the equipment plugged in should not exceed the ampere rating of the cord if
you are using an extension cord.
• To prevent overloading and blowing fuses, ensure that no other high power appliance is plugged into the
same socket, or another socket which is connected in the same circuit.
• DO NOT PUT the cord under the carpet, blankets. Always keep the power cable away from walkway in room.
• DO NOT TRY TO REPAIR the broken fuse by yourself, the user should take the set to your local authorized
maintenance center to replace it with the new one.
Before first Use
• Take apart the grill plate, small pans and/or granite grill plate, clean with a soft damp cloth. Place your appli-
ance on the level and stable surface.
• Check that the voltage marked on the product corresponds with your supply voltage. Ensure the controller
is in the "O" position before plug in.
Operation
• Connect the BBQ to the power supply. Turn the switch from "O" TO " " position and the indicator light is on
for working, then pre-heating the BBQ set for 5 minutes.
• As the different heat of cooking request, put your food on the small pans and place them under the heating
sources. Or place your food directly on the grill plate for the purpose of grilling.
• When you have finished using the BBQ, turn the switch to "O" position and unplug it from the socket. Wait
until the appliance is completely cool down before moving or cleaning.

Technical Data

10030526
220-240 V ~ 50-60 Hz
900 W

Safety Instruction

Use and Operation

4