Escalade Sports prince SPORT T8830 Instrucciones De Ensamblaje página 11

HARDWARE NEEDED
14
1/4-20 x 2" Hex Head Bolt
(Qty. 2)
19. Repeat steps from 1-15 on second half then continue on Step 20.
20. Attach linkages #4 to the OUTSIDE of U-support #7 on
second table half. Use bolts #14, plastic washers
#24 and hex nuts #15. See Figure 6.
NOTE: Tighten locknuts #15 finger tight only.
They will be removed when the two
table top halves are connected.
Plastic Washer
24
(Qty. 2)
¼" Locknut
15
(Qty. 2)
AT LEAST TWO ADULTS ARE NEEDED TO
24
14
NOTE: Tighten locknuts #15 finger tight
only. They will be removed when the two
table top halves are connected.
4
Second Table Top
Figure 6
11
CAUTION:
MOVE TABLE HALF!
4
7
24
14