Manual Operation - M.J. MALLIS GROUP siat F1 Manual De Instrucciones Y Recambios

12-OPERATION
12.1 CHOICE OF AUTOMATIC OR MANUAL MOde

12.2 MANUAL OPERATION

- Press the Emergency Stop button;
- position a pallet centrally on the platform;
- release the Emergency Stop button by turning it clockwise.
- Secure the film to the pallet as shown in the figure
- Push button 5.
- Select 'manual' cycle; turn the selection to position
- Push button 4 (I) to start the turntable rotation.
- Adjust the film tension tightening or releasing the ring nut on the
brake of the rubber or by the potentiometer 8 of the electromagne-
tic brake.
- Optimize the turntable rotation by the potentiometer 9.
- Turn to right and keep in position the selector 7 to start the film car-
riage ascent; release the selector when reached the desired height.
- Turn to left and keep in position the selector 7 to start the film car-
riage descent; release the selector when reached the desired
height.
- Push button 4 (O) to stop the turntable rotation
- Cut the film and remove the pallet.
Via Puecher, 22 - 22078 TURATE (CO) ITALY - Tel. 02964951 - Fax 029689727 - http://www.siat.com - Email: siat@siat.com
SIAT S.p.A.
8
7
9
4
ON
6
5
27/44