Beaba Babycall HD Folleto De Instrucciones página 11

PLEASE READ THESE INSTRUCTIONS CAREFULLY
AND KEEP THEM FOR FUTURE REFERENCE
2
1
5
4
7
10
A
Parent receiver (A) Receiver base unit
1. Light display 'on/off' button 9. Power 'On' indicator
2. 'On/off' button 10. 230V/50Hz adapter socket
3. Volume button (TBTS*)
4. Control screen
Baby transmitter (B)
5. Power 'On' indicator 11. Power 'On' indicator
6. Light indicators 12. 'On/off' button
7. Battery compartment - °C/°F 13. LR3/AAA battery
mode button compartment
8. 230V/50Hz adapter socket 14. 230V/50Hz adapter socket
(TBTS*) (TBTS*)
2 1
°
16
C
15
18
17
3
11
6
8
14
9
B
Receiver control screen
15. Temperature display
16. Signal reception display
17. Volume display
18. Battery level display
* TBTS*: very low voltage.
20
Babycall HD is a 100% digital baby monitor offering optimal listening and
reception quality. It comprises a baby transmitter and parent receiver
(with charging base unit). It is equipped with Pilot Tone System digital
technology designed to limit interference thanks to the 96 automatic
scanning digital channels. Transmission confidentiality is guaranteed thanks
to a unique coding system between the transmitter and the receiver.
TECHNICAL SPECIFICATIONS
Frequency
12
Communication range
Number of channels
Transmission method
Type of scanning
Batteries for the receiver
13
Batteries for the transmitter
Battery life
Adapter power
BABY TRANSMITTER
• For mains use plug in one of the two adapters provided or, for portable use, insert 3
LR3/AAA batteries (not provided).
• The unit must be placed upright, pointing towards the baby at a distance of 1 or 2 metres.
• To switch on the transmitter, press the 'On/off' button (12) for a few seconds. The 'Power On'
indicator (11) must light up. To switch off the unit, press the 'On/off' button for a few seconds.
PARENT RECEIVER + BASE UNIT
• The unit works on the mains using the second adaptor provided connected directly to the
receiver or via the recharging unit. The parent receiver also operates with batteries in
portable mode.
• To recharge the receiver's batteries, plug it directly into the mains using the adaptor or
place it on its recharging base unit. When using for the first time, recharge the batteries for
at least 16 hours, and then charge for 4 hours every time after that.
2.401 GHZ - 2.482 GHz
300 metres coverage over a clear area
96
frequency-hopping spread spectrum (FHSS)
automatic every 1/1000 th of a second
3 x AAA 3.6V 700 mA
3 x LR3/AAA (not included)
6 hours of continuous use
230V-30mA input | 6V-200mA
21
GB