Speaker Connection - Pioneer BCS-FS500 Manual Del Usuario

Speaker Connection

Attaching non-skid pads
• Attach the four large non-skid pads are for the subwoofer.
Use the supplied adhesive to attach 4 pads to the base of the subwoofer.
Assembling the speaker stands and securing
your front speakers
¥ Insert the pole from the holes behind the base and secure with the
4 screws.
ø Affix the gasket to the pole.
Affix the gasket to the surface of the pole where the speaker will be mounted.
π Insert the speaker cord from the hole behind the base through to
the pole and connect it to the speaker terminal. After connecting,
put the speaker wire in the gap on the back side of the speaker.
Match the colour tube on the wire with the colour indicator on the label, then
insert the white wire with gray line into the red (+) side and the other wire into
the black (-) side.
[ Secure the speaker and the pole with 2 screws.
Ensure that the speaker wire does not get pinched between the speaker and
the pole.
" After connecting, put the speaker wire in the back of the base of
the stand.
13