Parameter List; Standard Settings - Lenze Smart Motor m300 Instrucciones Para El Montaje

5 Commissioning

Parameter list

5.2 Parameter list
Parameter set management
Parameter
Name
PIN
New PIN

Standard settings

Parameter
Name
Parameter set name
Output speed 1
Output speed 2
Output speed 3
EN Output speed 4
Output speed 5
Acceleration time
Deceleration time
Energy saving function
42
Value
Delivery Setting range
[0000 ... 9999]
[0000 ... 9999]
Value
Delivery Setting range
[text]
Order−related [−2600/i ... −500/i] rpm
[0] rpm
[500/i ... 2600/i] rpm
Order−related [0.0 ... 20.0] s
Order−related [0.0 ... 20.0] s
Order−related
[Off]
[On]
Comment
PIN for the protection against unauthorised
alteration of the parameter set (0 = no
protection)
Alteration of "PIN" sets "new PIN" to the
same value
The parameters can also be read without a
PIN.
Future PIN for protection against
unauthorised alteration of the parameter set
Comment
File name of the parameter set without file
extension *.lsm
CCW rotation = < 0 rpm
STOP = 0 rpm
CW rotation = > 0 rpm
Lenze Smart motor with gearbox: The ratio i is
taken into consideration for the calculation of
the output speed.
Acceleration time t1 of the ramp generator
n
max
from 0 rpm to n
Deceleration time t2 of the ramp generator
from n
max
t
a
Optimised for:
¯ a high dynamic performance
¯ a maximum starting torque and torque
¯ a high speed accuracy
Reduced energy consumption in the partial
load operational range.
Approx. 50 % of the maximum starting torque
is provided.
[2600/i] rpm
max
[2600/i] rpm to 0 rpm
Lenze ¯ MDKSEMA ¯ 5.0