General Safety - BFT Espas 20T Instrucciones De Instalación

2 - GENERAL SAFETY

WARNING!
Incorrect installation or improper use of the product can result in injury to people and
animals or damage to property.
Read all literature that comes with this product carefully as it provides important information
regarding safety, installation, use and maintenance.
- Dispose of all packaging (plastic, cardboard, polystyrene, etc.) in compliance with the current
legislation. Keep nylon and polystyrene bags out of the reach of children.
- Keep hold of instructions so that you can attach them to the technical file and keep them
handy for future reference.
- This product has been designed and built solely for the purpose indicated herein. Uses not
contemplated herein might result in the product being damaged and could be a source of
danger.
- The Company disclaims all responsibility resulting from improper use or any use other than
that for which the product has been designed, as indicated herein.
- Do not install the product in an explosive atmosphere.
- Have the automated system's mains power supply fitted with a switch or omnipolar thermal-
magnetic circuit breaker with a contact separation of at least 3.5mm.
- Make sure that upline from the mains power supply there is a residual current circuit breaker
that trips at 0.03A.
- The Company disclaims all responsibility for the correct operation and safety of the automated
system if parts from other manufacturers are used.
- Only use original spare parts for any maintenance or repair work.
- Do not make any modifications to the automated system's components unless explicitly
authorized by the Company.
- Users must not make any attempt to work on or repair the automated system themselves and
must instead call in qualified personnel only.
- Anything that is not explicitly provided for in these instructions is not allowed.
19 - Espas 20T