FITFIU FITNESS MC-120 Manual Usuario página 48

USE THE PRODUCT
SAFETY TETHER AND EMERGENCY STOP
The product is equipped with an "emergency stop system" (A). This safety
system must be connected to the console for it to work. It is designed to be
attached to your clothing so that if you leave or fall off the equipment it will
automatically stop, helping to prevent injury.
Before beginning a training session, make sure that the safety key is
properly placed on the console and that the clip is securely fastened to
your clothing. When you finish each workout and stop the machine, remove
the safety key.
NOTE: Make sure the tape is plugged in at 220 volts and has a grounding plug.
CONSOLE AND FUNCTIONS
SCREEN
The console has:
1. Three display screens: SPEED, TIME, DISTANCE, CALORIES, PULSE, PROGRAM.
2. Functional keys: SPEED+, SPEED-, START/STOP, MODE, PROGRAM.
KEYBOARDS
1. MODE: Press the "MODE" key to enter the countdown, calorie or distance mode. To adjust the desired amount
press "+" or "-". A mode can only be preset when the treadmill is stopped.
2. "START/STOP": Press the key to stop the treadmill.
NOTE: The system will shut down and stop once the desired target has been reached.
STARTING THE MACHINE
Connect the treadmill plug to the power, then place the security key on the console and turn on the equipment. To
start the machine, press the START button, "3-2-1" will appear on the display and the treadmill will start rolling at a
speed of 1km/h.
48
A