SATA 97925 Manual Del Uso página 15

Air temperature can be adjusted to applicable to a wide range of applications. The following table shows different application settings.
First gear
First gear
Second gear
Warning:
If the correct setting is not determined, set a low temperature and gradually raise the temperature to the optimum
temperature
97925
Dry color tone sample, filler, adhesive, construction joints and gypsum model
Catalyze adhesives, such as contact adhesives on bonding surfaces, activate adhesive glue, accelerate
the bonding process, melt adhesion points, and remove or glue plastic films to plate edges.
Use for packaging shrinking and PVC pipe insulation
Melt frozen steps, door lock, trunk lid, vehicle door and water pipe. Unfreeze the frost on the refrigerator
For welding thermoplastic plastics, PVC floor, PVC-coated material, PVC awning and PVC film
Weld the tin, special silver solder, SMD-building components, cable terminal and melt the soldering tin
Remove old and thick oil layer or paint layer and lime plaster
Sterilize the live-stock shed with 600 ℃ hot air for rapid sterilization. In addition, it can also effectively
resist the invasion of carpenter worm. （Note: Fire Danger! Do not overheat the surface of the wood
中文
Application
Dry damp wood
Remove stickers
Waxing and dewaxing
and ice box
Bend plastic pipes and plates
joints
Loose rusty or fixed nuts and tight bolts
EN DE RU KO PT JA ES
15