Technical Data; Quality Assurance; Environment Protection - SATA 97925 Manual Del Uso

9.1 Maintenance:
The electric tool is well designed and suitable for long time operation with minimal maintenance. Proper maintenance and regular
cleaning is necessary to achieve continuous satisfactory work efficiency.
9.2 Lubrication:
The electric tool does not need extra lubrication.
9.3 Cleaning:
1 ）Keep the vent of the machine clean to prevent motor overheating.
2） Clean the housing with soft cloth regularly. It is best to clean it after each use.
3 ）If a soft cloth is not enough to clean the dirt, dip the soft cloth in soapy water.
Warning:
Do not use gasoline, alcohol, ammonia, and other solvents that may damage the plastic parts

10.Technical Data:

Voltage
Power
Temperature/ air flow

11.Quality Assurance:

1 ） The product is in accordance with the statutory/national provisions, and initially used by the user from the date of purchase.
2 ）This warranty covers all material or manufacturing defects. Excluding: normal wear and tear of defective parts, such as bearings,
brushes, cables, plugs and/or drill bits and its fittings, and saw blades; we bear no transportation cost for the accidents or
reconstruction caused by misuse of damaged or defect parts.
3 ） We are entitled to reject any claim when the purchase cannot be verified or the product is not regularly maintained （cleaning of
vent, periodic maintenance of carbon brush）
4 ）Keep the purchase receipt as the proof of the date of purchase.
5 ）For sales return, the tool must not be dismantled and in an clean condition which can be accepted by the distributor, with the proof
of purchase attached.

12.Environment Protection:

Sorted recovery. Such products shall not be disposed together withgeneral household wastes
If your machine needs to be replaced or is no longer in use, do not dispose it with household wastes. Separate the products
for recycling
18
97925
中文
EN
220 V -50HZ
2000 W
I 50℃ ;250-500L/min
II 50-650℃ ;250-500L/min
DE RU KO PT JA ES