Emergency Button - Clarity C710 Guia Del Usuario

GB
A tone is emitted and the phone returns to standby mode screen.
NOTE: A new entry saved under a number where a previous telephone number is
already saved, will overwrite the original entry without any warning that the location
is already in use.
DELETING ENTRIES IN THE PHONE BOOK
To erase an entry select the memory location but do not enter any telephone number
and press ."ERASE" will be displayed then press
MAKING TELEPHONE CALLS TO A STORED NUMBER
Press the button.
Select the required memory location number on the keypad (0 to 9)
Press the button to call the telephone number.
When the phone is in use the
shall appear on the handset display.
After 5 seconds of no further key press, the call timer will
start counting.
To end the call, press the

EMERGENCY BUTTON

This is a one-touch memory button, which can store an emergency number of
your choice.
Storing an Emergency Number (same steps as when storing a telephone number in the
phone book.)
Press the button.
The following shall be displayed.
Press .
15
.
icon
button again.
'Location' shall be displayed on the handset screen.
Select the button.
Enter phone number to be stored (up to 25 digits).
To delete an incorrect entry, press
Press .
A beep is emitted and the phone returns to standby
mode screen.
CALLING THE EMERGENCY NUMBER
Simply press the button and the phone automatically dials the emergency
number and displays it on the handset screen.
To end the call, press the button.
NOTE:This is a recessed key to avoid pressing it accidentally.
.
GB
16