Dialing A Phonebook Entry; Deleting A Stored Number; Deleting All Stored Numbers; Changing A Stored Number - Clarity C4210 Guia Del Usuario

TELEPHONE OPERATIONS

Dialing a Phonebook Entry

1. Locate the phonebook record you wish
2. Press TALK or ENTER button to dial the

Deleting a Stored Number

1. Unit must be in standby mode and display
2. Press DEL/CH key once.The LCD will
3. Press DEL/CH to confirm.
4. The display will show MEM DELETED for 3
5. The display will show the next available

Deleting All Stored Numbers

1. Unit must be in standby mode and display is
2. Press and hold DEL/CH button for 3 seconds
3. Press DEL/CH to confirm. Display will show
28
to call.
displayed number.
is showing a phonebook record.
show DELETE?
seconds together with a success keynote.
record or -NO RECORDS-.
• If the memory location is empty, pressing
DEL key will have no action.
• This sequence will time-out after 30
seconds if no key is pressed.
showing a valid phone record.
to delete all phonebook records. Display will
flash DELETE ALL?.
-NO RECORDS- for 2 seconds together with
a success keynote.
• If the memory location is empty, pressing
DEL key will have no action.
• This sequence will time-out after 30
seconds if no key is pressed.
TELEPHONE OPERATIONS

Changing a Stored Number

1. Unit must be in standby mode only.
2. Press MODE key twice.The display will show
PHONEBOOK for 1 second and then display
the first available record.
3. Press the UP ( ) or DOWN (
▲ ▼
to the record to be changed, e.g.ABC, 567
4. Press # key to change the phone record.
5. The display will show ENTER TO END and
the stored number 567 with the blinking
cursor after the digit 7.
6. Press any numeric key to add extra numbers.
Or
Press DEL/CH key to move the cursor to the
digit 7.Then press other numeric key to
replace 7.
7. Press ENTER after finishing the digits.
8. The display shows ABC with the cursor
blinking after the character C.
9. Press any numeric key 2 to 9 to add
extra characters.
Or
Press DEL/CH key to move the cursor back
to character C.Then press any other
numeric key to change this character.
10. Press ENTER to finish.The modified
characters and numbers will replace the
original phone record.
11. The display will show NUMBER STORED.

Adding the EMERGENCY Number

1. Unit must be in standby mode only.
2. Press MODE key twice.The display will show
PHONEBOOK for 1 second and then display
the first available record.
) button to go
29