Assa Abloy NPC Manual Del Usuario página 6

Opening cabinet using only PIN code
1. Key PIN code and end with [OK] #. Eg 4 4 4 4 #
2. Green LED shows when a valid code has been used.
3. Turn handle to right to open door.
4. Close door.
5. Turn handle to left to lock cabinet.
Opening cabinet using only RFID tag
1. Key [RFID] *
2. Green LED fl ashes.
3. Place RFID tag against keyboard.
4. Green LED shows when valid RFID tag is used.
5. Turn handle to right to open door.
6. Close door.
7. Turn handle to left to lock cabinet.
Opening cabinet using both PIN code and RFID-tag
1. Key PIN code. Eg 4 4 4 4
2. Key [RFID] *
3. Green LED fl ashes.
4. Place RFID tag against keyboard.
5. Green LED shows when valid RFID tag and PIN code are used.
6. Turn handle to right to open door.
7. Close door.
8. Turn handle to left to lock cabinet.
4