Broan Elite EPD61 Serie Instrucciones De Instalación página 8

10. CONNECT WIRING ( ' )
CONT D
Connect cable into electrical compartment
using provided waterproof wire connectors.
Connect BLACK to BLACK, WHITE to WHITE
and GREEN or bare wire under ground screw.
Reinstall electrical compartment cover.
HE0138
11. REINSTALL GREASE DRIP RAIL AND BAFFLE FILTERS
Reinstall grease drip rail. The illustration at right
shows how to reinsert the grease drip rail into the
range hood.
HD0472
CAUTION
Remove protective plastic film covering filters before installing them.
It is recommended to install side filters first and finish with center one(s).
1. Insert one end of the filter into the upper channel of the hood.
2. Raise the other end toward the inside of hood and insert in the grease drip rail of the hood.
1 2
HD0473
- 8 -