Control Panel - Flex ALC 3/1-G Instrucciones De Funcionamiento

Control panel

1 Operating mode button
Switches in succession through the 6
different laser projection types.
1x front horizontal + front vertical
2x front horizontal
3x front vertical
4x front vertical + side vertical + ground
beam
5x all beams activated + self-levelling
device switched off/blocked
6x all beams activated + self-levelling
device switched on (standard
operating mode when the device has
been switched on)
2 Toggle button for levelling mode
The lock button is pressed to block the self
levelling feature for aligning lines that are not
horizontal/vertical.
3 Charge status of rechargeable battery
4 Display indicating working with/without
levelling
The LED (4) is lit green when self-levelling is
switched on.
The LED (4) is lit red when the self-levelling
range is exceeded (± 4°) or when self-
levelling is switched off/blocked.
FLEX ALC 3/1-G
13