Combining Straight And Corner Flower Steps; Cleaning; Storage - Gardenline 94228 Manual Del Usuario

6. Secure the M6 × 38 mm screws with the M6 nuts
Note that there will be two M6 × 38 mm screws and two M6 nuts if you have
two sets of flower steps.
7. Check if the position of the flower steps is satisfactory.
8. Tighten the M6 × 38 mm screws and the M6 nuts with the open-ended
spanner 12

Combining straight and corner flower steps

You can combine straight flower steps and corner flower steps to create a large
semi-circular set of flower steps, or a large rounded-corner square set of flower
steps or an oval set of flower steps.
− Follow the steps in the chapter "Combining sets of flower steps", to create
your desired flower steps shape.

Cleaning

NOTICE!
Risk due to improper handling!
Improper handling of the flower steps may result in damage.
− Do not use any aggressive cleaners, brushes with metal or
nylon bristles, sharp or metallic cleaning utensils such as
knives, hard scrapers and the like. They could damage the
surfaces.
1. Remove all flower pots, ornaments and objects from the flower steps.
2. Use a mild soapy solution on a damp sponge to wipe down all parts of the
flower steps.
3. Wait for all parts to dry completely before replacing flower pots, ornaments
and objects.

Storage

− If you will not be using the flower steps for a prolonged time (e.g., one
month or more), store the flower steps in a cool, dry place. Avoid dust,
water, extreme temperatures, high humidity and direct sunlight.
− Make sure the flower steps are stored in a such a way that it does not pose a
hazard and that there is no danger of it falling from a height.
− Do not stack objects that exceed 55.12 lbs (25 kg) on each shelf.
− Keep the flower steps and its components out of reach of children.
or the ring spanner
11
13
.
Cleaning
(see Fig. I).
13