Technical Data - Husqvarna 135 Manual De Instrucciones

Technical data

Engine
Cylinder displacement, cu.in/cm
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Power, kW/hp @ rpm
Emissions Durability Period according to
California Air Resources Board, h.
Ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication system
Fuel tank capacity, US pint/litre
Oil pump capacity at 9,000 rpm, ml/min
Oil tank capacity, US pint/litre
Type of oil pump
Weight
Chain saw without bar, chain and with empty
tanks, lb/kg
Chain/bar
Standard bar length, inch/cm
Recommended bar lengths, inch/cm
Pitch, inch/mm
Thickness of drive links, inch/mm
Drive sprocket type/teeth
Maximum chain speed, m/s
NOTE! This spark ignition system complies with the Canadian ICES-002 standard.
Recommended cutting equipment for USA
Following is a list of recommended cutting equipment for Husqvarna chainsaw models 135,135e,140,140e and 140e
TrioBrake. These chain saw models equipped with either of the listed bar and saw chain combination(s), fulfills the
requirements according to ANSI B175.1-2012 (Gasoline Powered Chain Saws - Safety Requirements).
The following list is the chain saw manufacturers recommendations. There may be other combinations available, which
will also achieve kickback reduction.
Chain saw models Husqvarna 135,135e,140,140e and 140e TrioBrake met the kickback performance requirements of
ANSI B175.1-2012 when tested with the combinations of bars and saw chains listed below. The saw chain Husqvarna
H37 is also classified as a low kickback saw chain since it met the requirements for low kickback saw chain outlined in
ANSI B175.1-2012. We recommend to use only the listed combinations of bars and chains for chain saw models
Husqvarna 135,135e,140,140e and 140e TrioBrake. Other chain saw models may not meet the kickback requirements
when equipped with the listed guide bar and saw chain combinations.
Recommended cutting equipment for Canada
Following is a list of recommended cutting equipment for the Husqvarna chain saw models 135, 135e, 140, 140e and
140e TrioBrake. The listed combination(s) of powerhead, guide bar and saw chain meet all requirements outlined in
Canadian Standards Assosiation Z62.1-15 (Chain Saws) and Z62.3-11 (R2016) (Chain Saw Kickback).
1158605-49 Rev.2 2017-04-28
TECHNICAL DATA
135
3
2.49/40,9
1.61/41
1.22/31
2900
1,5/2,0 @ 9000
125
NGK BPMR 7A/
Champion RCJ 7Y/
Husqvarna HQT-1
0.02/0,5
0.78/0,37
13
0.53/0,25
Automatic
9.7/4.4
14/35
14-16 / 35-40
3/8" /9,52
0.050/1,3
Spur/6
22,9
135e 135e TrioBrake
2.49/40,9 2.49/40,9
1.61/41 1.61/41
1.22/31 1.22/31
2900 2900
1,5/2,0 @ 9000 1,5/2,0 @ 9000
125 125
NGK BPMR 7A/ NGK BPMR 7A/
Champion RCJ 7Y/ Champion RCJ 7Y/
Husqvarna HQT-1 Husqvarna HQT-1
0.02/0,5 0.02/0,5
0.78/0,37 0.78/0,37
13 13
0.53/0,25 0.53/0,25
Automatic Automatic
10.1/4,6 10,6/4,8
14/35 14/35
14-16 / 35-40 14-16 / 35-40
3/8" /9,52 3/8" /9,52
0.050/1,3 0.050/1,3
Spur/6 Spur/6
22,9 22,9
English – 33