Information; Overview; Intended Use; Technical Information - Multifan V-FloFan Instrucciones De Instalación - Instrucciones De Uso

3

Information

3.1

Overview

Illustration 1: V-FloFan overview
1 Air deflector
2 Suspension bracket
3 Fan rating plate and terminal housing cover
4 Guard
5 Fan motor
6 Impeller
Identification of the product
A rating plate is permanently attached to the V-FloFan and it must not be
removed.
The rating plate displays electrical, mechanical and identification information.
Each fan has a unique 14-digit numerical serial number which is listed on the
rating plate. The serial number must be provided in any future
correspondence regarding this fan as it is the unique information used for
identifying the fan in question.
A QR-code is displayed on the rating plate. This QR-code contains a link to
an information page about this product. Here you can find a digital copy of
these instructions as well as other information about this product.
3.2

Intended use

Illustration 2: VFloFan operating principle
4 | ENGLISH
This V-FloFan is intended for the destratification of air. This V-FloFan
creates vertical air movement with a very low air speed. This fan is specially
designed for use in greenhouses. This fan can also be used in poultry barns
or other applications where destratification with low air speeds is desired.
NOTICE
1
This fan is intended for moving air only.
2
DANGER
Do not use this fan in explosive or potentially explosive atmo-
3
spheres.
3.3

Technical information

4
For detailed technical information please visit our website from which
technical datasheets can be viewed and downloaded.
5 http://productselector.vostermans.com
4

Installation

6
► Before commencing installation
1. Check the fan after you have received it and make sure it has not been
damaged during transport.
2. Briefly rotate the impeller and/or motor shaft by hand to make sure they
rotate freely.
3. Check all the information on the rating plate and verify that this fan is
suitable for the intended application.
The bracket is tilted downwards for shipping purposes. Upright the bracket
and fasten the bolts and nuts.
Illustration 3: Uprighting the bracket
4.1

Mechanical

Installation position
A
Illustration 4: V-FloFan installation position
2x
B
Original instructions
V-FloFan
INS00008-B