Argus 220 TIMER Guia De Instalacion página 9

Schnittstelle: zur Erweiterung mit einem Funkmodul
(565495) für drahtlose Verbindung mehre-
rer Geräte
Überwachungsbereich: 220°
Reichweite: max. 16 m
Anzahl der Ebenen: 7
Anzahl der Zonen: 112 mit 448 Schaltsegmenten
Mindestanbauhöhe: 1,7 m
Empfohlene Anbauhöhe: 2,5 m
Empfindlichkeit: stufenlos einstellbar
Lichtfühler: stufenlos von außen einstellbar,
ca. 3–1000 Lux.
Schaltdauer: in 6 Stufen von außen einstellbar,
ca. 1 s – ca. 8 min
Einstellmöglichkeit des
Sensorknopfes
Wandmontage: 9° auf, 24° ab, 12° rechts/links, ±12° axial
Deckenmontage: 4°auf, 29° ab, 25° rechts/links, ±8,5° axial
Schutzart: IP 55 bei einem Neigungswinkel von 15°
bis 90°
EG-Richtlinien: Niederspannungs-Richtlinie 73/23/EWG,
EMV-Richtlinie 89/336/EWG
Technische Daten
13
What you can do with ARGUS 220 Timer
What you can do with ARGUS 220 Timer
ARGUS 220 Timer (here simply called "ARGUS") is an electronic
movement detector for inside and outside use. It registers moving
sources of heat, such as people, within a defined range (Figure !):
A Inner security zone:
area of detection 360°, radius approx. 4 m.
B Medium security zone:
angle of detection 220°, area of detection approx. 9 m x 18 m.
C Outer security zone:
angle of detection 220°, area of detection approx. 16 m x 28 m.
Note: The specified ranges refer to average conditions and a
|
mounting height of 2.5 m and should therefore be taken as guide
values. The range can vary greatly depending on the weather.
ARGUS switches a connected load whenever it detects a movement.
These could be ohmic loads (e. g. 230-V incandescent and halogen
lamps), capacitive loads (e. g. electronic transformers) or inductive loads
(e. g. low-voltage halogen lamps with inductive transformer). In addition,
it is fitted with a light-sensitive time switch which enables it to switch
connected loads on and off when an adjustable twilight threshold has
been reached, or at particular times which can also be set.
The various connection options are described in the section "How to
install the electrical connection", A – F ..
If you additionally equip ARGUS with an ARGUS 220 movement detector
radio module (565495) you can connect several ARGUS 220 Connect or
ARGUS 220 Timer devices wirelessly. When one of the movement
detectors registers a movement, it transmits to all assigned movement
detectors or receivers via the radio module; these then switch on their
connected loads for the switching duration set on the device in question.
14