Klarstein SINDELFINGEN Manual De Instrucciones página 9

OPERATION
1. Insert the plug into the socket.
2. Open the front cover. Grab the watch cushion with your thumb and forefinger
at the side markings and pull it out.
3. Attach the watch to the cushion by compressing the spring. Then pull the
clock over the cushion and release it again (see picture).
4. Once the watch is attached to the cushion, place the cushion back into the
watch winder. Push it in until it clicks into place.
5. Close the cover. Use the selection switch from the back of the unit to select
one of the A-D modes. Use the on/off switch to select whether the watch
should rotate clockwise or counterclockwise.
MODES
Mode Description
A 650 Turns per day
B 900 Turns per day
C 1200 Turns per day
D 1500 Turns per day
EN
9