Descargar Imprimir esta página

KTM Power Parts 76503090100 Instrucciones De Montaje página 5

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Scope of delivery:
1x engine guard, aluminum
1x holding bracket, front
2x rubber sleeves
2x engine guard brackets
2x hexagon head screws DIN 931 M8x20
2x hexagon head screws DIN 931 M6x16
2x flat-head screws M6x20
2x fasson washers M6
2x shimsDIN 125 M6
2x shimsDIN 125 M8
2x self-locking hexagon nuts DIN 985 M8
NOTE: The aluminum engine guard is suitable for models 690 Enduro and
690 SMC
Preparations (690 Enduro only)
Remove the original plastic engine guard.
NOTE: The rubber sleeves of the original plastic engine guard can be used
again. You can also use the supplied rubber sleeves.
Assembly
Insert the rubber sleeves into the frame sockets.
Mount the front holding bracket on the front engine support using hex screws
M6x16 and shims M6.
NOTE: Initially only tighten the screws lightly so that the holding bracket
remains loose.
Insert the brackets of the aluminum engine guard into the rubber sleeves.
76507066000
76503091000
5

Publicidad

loading