Axxess AXDI-CH13 Instrucciones De Instalación página 2

APPLICATIONS
Applications below use the LD-BX-CH1 harness:
CHRYSLER DODGE
300 2005-2007 Caliber
Charger
Aspen 2007
PT Cruiser 2006-2010 Dakota
Durango
Magnum
Ram 2500/3500
Ram
Ram Chassis Cab
Applications below use the LD-BX-CH2 harness:
CHRYSLER DODGE (CONT)
200 2011-2014 Durango
300 2008-2010 Journey
Aspen 2008-2009 Magnum
Sebring 2007-2010 Nitro
Town & Country 2008-2017 Ram
Ram 1500
DODGE
Ram Chassis Cab
Avenger 2008-2014
Caliber 2009-2012 JEEP
Grand Caravan 2008-up Commander
Challenger 2008-2014
Compass
Charger 2008-2010 Grand Cherokee
Dakota 2008-2011 Liberty
2
JEEP
2007-2008 Commander 2006-2007
2006-2007
Compass 2007-2008
2005-2007 Grand Cherokee 2005-2007
2004-2007 Patriot 2007-2008
2005-2007
MITSUBISHI
2009
Raider 2006-2007
2006-2008
2006-2010
JEEP (CONT)
2008-2013 Patriot 2009-2017
2009-2010 Wrangler 2007-2017
2008-2009 Wrangler (JK)
2007-2011 Wrangler Unlimited 2007-2017
2010-2011
MITSUBISHI
2009
Raider 2008-2009
2011
RAM
1500/2500/3500
2008-2010 Chassis Cab
C/V Tradesman 2012-2015
2009-2017.5
2008-2013
VW
2008-2012
Routan 2009-2013
From the LD-BX-CH1 OR LD-BX-CH2 harness to the aftermarket radio:
• Connect the Black wire to the ground wire.
• Connect the Yellow wire to the battery wire.
• Connect the Red wire to the accessory wire.
Note: If installing an AXSWC (sold separately), there will be an accessory wire there to
connect as well.
• If the aftermarket radio has an illumination wire, connect the Orange wire to it.
• If the vehicle is equipped with a factory amplifier, connect the Blue/White wire to the amp
turn on wire. This wire must be connected to hear sound from the factory amplifier.
• Connect the Blue wire to the power antenna wire.
• Connect the Gray wire to the right front positive speaker output.
• Connect the Gray/Black wire to the right front negative speaker output.
2018
• Connect the White wire to the left front positive speaker output.
• Connect the White/Black wire to the left front negative speaker output.
• Connect the Green wire to the left rear positive speaker output.
• Connect the Green/Black wire to the left rear negative speaker output.
2012
2012
• Connect the Purple wire to the right rear positive speaker output.
• Connect the Purple/Black wire to the right rear negative speaker output.
Continued on the next page
CONNECTIONS