Cleaning And Maintenance Instructions - Bradley OmniDeck 3000 Serie Manual De Instalación

Installation
Cleaning and Maintenance for Terreon
Material Description: Terreon is an NAHB Certified densified solid surface material composed of polyester resin and is resistant
to chemicals, stains, burns and impact. Surface damage can be easily repaired with everyday cleansers or fine grit abrasives.
Routine Cleaning: Clean daily or as often as conditions require using a standard commercial or household cleaner such as
Formula 409 or Windex
®
Stubborn Stains: Remove tough stains with Ajax
circular motion with 240 grit wet/dry sandpaper. The finish can be renewed with a maroon Scotch-Brite
Special Situations for Terreon Material
Scratches: Remove scratches with a green Scotch-Brite
pad, followed by a white Scotch-Brite
Hard Water Deposits: Remove hard water deposits with a mild solution of vinegar and water . Always rinse the unit
thoroughly after cleaning .
Restoring the surface: Use Hope's
material. Bradley recommends additional care and maintenance for the darker colored Terreon. For additional information,
visit bradleycorp .com .
Do not use strong acid or alkaline chemicals and cleansers to clean Terreon. If these chemicals come in contact
with the surface, wipe them off immediately and rinse with soapy water. Avoid contact with harsh chemicals
such as paint remover, bleach, acetone, etc. Avoid contact with hot pans and objects.
Repair Kits: Terreon repair kits are available . Contact your Bradley representative or distributor for part numbers and pricing
Repair kits are made to order and have a shelf life of 30 days .
Terreon is a unique, cast solid surface material. Aggregate flow and distribution as well as shades of color can vary from
product to product creating natural characteristics.
Cleaning and Maintenance for Stainless Steel
Material Description: Stainless steel is extremely durable, and maintenance is simple and inexpensive . Proper care, particularly
under corrosive conditions, is essential . Always start with the simplest solution and work your way toward the more complicated .
Routine cleaning: Daily or as often as needed use a solution of warm water and soap, detergent, or ammonia . Apply the cleaning
solution per the manufactures instructions and always use a soft cloth or sponge to avoid damaging the finish.
Stubborn Stains: To remove stains from stainless steel use a stainless steel cleaner and polish such as Ball
cleaner or a soft abrasive . Always follow the manufactures instructions and apply in the same direction as the polish lines .
Never use ordinary steel wool or steel brushes on stainless steel. Always use stainless steel wool or stainless
steel brushes.
Fingerprints and Smears: To remove fingerprints or smears use a high quality stainless steel cleaner and polish in accordance
with the manufactures instructions . Many of these products leave a protective coating the helps prevent future smears and
fingerprints.
Grease and Oil: To remove grease and oil use a quality commercial detergent or caustic cleaner . Apply in accordance to the
manufactures instructions and in the direction of the polish lines .
Precautions: Avoid prolonged contact with chlorides (bleaches, salts), bromides (sanitizing agents), thiocyanates (pesticides,
photography chemicals, and some foods), and iodides on stainless steel equipment, especially if acid conditions exist .
Do not permit salty solutions to evaporate and dry on stainless steel.
The appearance of rust streaks on stainless steel leads to the belief that the stainless steel is rusting . Look for the actual source of
the rust in some iron or steel particles which may be touching, but not actually a part of the stainless steel structure .
Strongly acidic or caustic cleaners may attack the steel causing a reddish film to appear. The use of these cleaners
should be avoided.
Brand Names
Use of brand names is intended only to indicate a type of cleaner . This does not constitute an endorsement, nor does the omission
of any brand name cleaner imply inadequacy . Many products named are regional in distribution, and can be found in local
supermarkets, department and hardware stores, or through your cleaning service . It is emphasized that all products should be used
in strict accordance with package instructions .
Bradley • 215-1219 Rev. M; ECN 13-11-002A
.
®
, Comet
®
® pad or 30-micron sandpaper .
Solid Surface cleaner and polish to refresh and protect the Terreon Solid Surface
®
, or Soft-Scrub and a green Scotch-Brite
® ®
pad. The finish can then be renewed with a maroon Scotch-Brite
®
LD-3010 Series
pad or lightly sand in a
®
pad .
®
stainless steel
®
7/16/2013
®
9