Omnideck Mounting - Bradley OmniDeck 3000 Serie Manual De Instalación

Installation
2 OmniDeck™ Mounting
Terreon SL-TO1 oval bowl is shown.
All other bowls are similar.
Carrier Sleeve Mounting
Secure the carrier
B
sleeves to the bottom
of the lav deck at the
desired locations with
silicone caulk/sealant.
Carrier
Sleeve
With help, slide the lav deck
onto the carrier, aligning the
C
access holes in the carrier
sleeves with the carrier arm
leveling screws and locking
device . Adjust the carrier
sleeves as needed .
Bracket Mounting
Apply PC-Concrete
A
repair and anchoring epoxy (or
equal) to the top of the mounting
strips (left-hand bracket shown).
Bradley • 215-1219 Rev. M; ECN 13-11-002A
Install the concealed
A
arm lav carrier
(supplied by installer)
per manufacturer's
instructions .
Leveling
Screws
Locking
Device
FinishedFloor
injectable
®
Table A
Carrier Arm Spacing
Basin Model #
SL-TO1
SL-TR1
HS-TO1
HS-TS1
HS-TR1
Bottom View of Lav Deck
with Carrier Sleeves
Leveling Screw
Access Hole
Locking Device
Access Hole
Leveling Screw
Access Hole
SL-TR1 rectangular bowl is shown, all other
bowls are similar.
Backing substrate required for structural
integrity if brackets aren't secured to a stud.
LD-3010 Series
(min.)
22" (559mm)
23" (584mm)
27½" (699mm)
19" (483mm)
27½" (699mm)
6" (152mm)
See Table A
Position the trap covers snug
B to the underside of the basin .
Secure the trap covers to the
wall with four #10 fasteners
(supplied by installer).
7/16/2013
Carrier
Sleeve
6" (152mm)
9"
(229mm)
7